Encountering the occasional need to reset tripped breakers is not a big
deal. However, if this occurs frequently, it could be an indication of
the need for electrical repair in Comal County, TX. If you accept that
a visit to your fuse box is just part of running the dishwasher, using
your home theater or keeping a space heater and hair dryer on at the same
time, it is likely time to examine your system. Here are some reasons
why breakers might keep tripping, and what you can do about them:
Excessive activity in one room or area: You know there is a tripped breaker because one area or room in your house
no longer has electricity. Power outages and system failures affect electricity
in your entire home. When you notice that one area experiences frequent
power loss, look around for signs as to why this occurs. It could be that
your system requires an upgrade, or you may need to move items to other rooms.
Overloaded circuits: Breaker trips occur because a wire or circuit receives more amperage than
it is designed to handle. Without this reaction, your house could catch
fire or, at the very least, your system could be compromised and nothing
will run. Old or worn wires lead to bad connections that make it easy
for circuits to overload. Also, if you’ve recently added more computers
or high-end appliances, their demand for electricity may be higher than
your system allows. Try unplugging these items before setting the breaker.
Once reset, plug in one at a time until the breaker trips again. That
indicates which appliance causes the overload, and it is likely you need
a circuit with higher amperage.
Short circuits: When an active wire and a neutral wire touch, it causes a current overflow
that overloads the system. This should involve only a tripped breaker
and the need for repairs. However, if you notice sparks, popping sounds
and smoke, you need to call an electrician right now. You may have a damaged
connection that is a house fire waiting to happen. Also, rodents chew
on wires, so if your home was recently visited by an exterminator, have
an electrician check your electrical system once the mice and rats are
gone. Short circuits are a better-safe-than-sorry condition you want addressed
Ground faults: This results from an active wire touching a ground wire. It leads to excessive
current which trips a breaker. In these cases, your Ground Fault Circuit
Interrupter (GFCI) may be wearing out, or your home may not be equipped
with one at all. The only solution to ground faults is to replace the
GFCI and other electrical components.
Tripped breakers are a safety precaution. If they did not occur, you would
experience much more than a mere annoyance. Electrical failure and fires
result when breakers do not trip when overloaded. While overloaded breakers
are not uncommon in our technological age, they are also not something
you want to handle on your own unless you have training as an electrician.
If you need skilled electrical repair in Comal County, TX, call Lowry Electrical
today and speak with one of our experts!